MIL-T-52831E
procuring activity. Hazard signs shall conform to MIL-STD-1474, 4.3, except the sign will state "HEARING PROTECTION REQUIRED WITHIN ( ) FEET." The sign shall be readable at the distance indicated on the sign.
3.15 Health and safety. The tamper shall comply with all applicable OSHA standards that are in effect on the date of the opening of the bids. All rotating or reciprocating parts and all parts subject to high operating temperatures or voltage shock, that are of such a nature, or are located to be a hazard to operating or maintenance personnel shall be guarded or insulated to the extent necessary to eliminate the hazard.
3.15.1 Safety warning label. A safety warning label shall be affixed permanently to the inside of the carrying case lid and to the fuel tank adjacent to the filler cap. This label shall read: "WARNING: DRAIN GAS TANK AND CLOSE TANK CAP VENT BEFORE PUTTING TAMPER INTO CARRYING CASE." The label shall have a yellow background with black letters and be of corrosion-resistant type material. Standard operating procedures in the instruction manuals for this item shall also contain information regarding this possible safety hazard.
3.16 Technical publications. Technical publications (commercial manuals) shall be furnished as specified in the contract or purchase order (see 6.4).
3.17 Weight. The weight of the tamper, fully serviced, less fuel, shall not be greater than
140 pounds. The weight of the tamper and the words "THREE PERSON LIFT" shall be
prominently labeled on the tamper.
3.18 Dimensions. The tamper dimensions including accessories shall not exceed the following:
Length - 39.00 inches. Width - 22.00 inches. Height - 46.00 inches.
3.19 Treatment and painting. Unless otherwise specified (see 6.2), the portions of the
tamper normally painted shall be cleaned, treated, primed and painted conforming to MIL-T-704, type F. The finishing coat shall conform to MIL-C-46l68 for camouflage green 383. When specified (see 6.2), surfaces normally painted in good commercial practice shall be cleaned, treated and painted as specified herein. The color of the finish coat shall be as specified
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business