NOT MEASUREMENT
SENSITIVE
MIL-P-29228A(YD)
20 November 1991
SUPERSEDING
MIL-P-29228(YD)
5 August 1983
MILITARY SPECIFICATION
PILE EXTRACTOR, AIR OPERATED
This specification is approved for use by the Naval Facilities
Engineering Command, Department of the Navy, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE 1.1 Scope. This specification covers air operated impact type
pile extractors for loosening and pulling various types of construction piles.
APPLICABLE DOCUMENTS
2.
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
FEDERAL
PPP-B-601 - Boxes, Wood, Cleated-Plywood.
PPP-B-621 - Boxes, Wood, Nailed and Lock-Corner.
PPP-B-636 - Boxes, Shipping, Fiberboard.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed tie:
Commanding Officer (Code 156), Naval Construction Battalion Center, Port
Hueneme, CA 93043-5000, by using the self-addressed Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
FSC 3895
AMSC N/A
Approved for public release; distribution is
DISTRIBUTION STATEMENT A.
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business