MIL-R-52453C(ME)
TIRE AND RIM ASSOCIATION, INC.
T&RA Yearbook
(Application for copies should be addressed to Tire and Rim Association, Inc., Command
Building, 34 North Hawkins Avenue, Akron, OH 44313.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
3. REQUIREMENTS
3.1 Description. The roller shall be a wagon axle type, or articulated center hingepoint type. The roller shall be diesel engine driven, have nine variable pressure pneumatic tires, and be provided with full power hydraulic steering and oscillating wheels. The roller shall be of the latest model of the standard product of the manufacturer, and shall have been marketed commercially for at least one year prior to the opening of the technical proposal or bids. Rollers shall meet the requirements specified in table I.
Table I. Dimensions and Weights.
Height, Maximum 96 inches Width, Maximum 80 inches Empty Weight, Maximum 9,000 pounds
3.2 First article. Unless otherwise specified (see 4.3.1, 6.2) the contractor shall furnish one or more rollers for preproduction inspection within the time frame specified (see 6.2) to prove prior to starting production that his production methods and choice of design detail will produce rollers that comply with the requirements of this specification. Examination and tests shall be as specified in Section 4 and unless otherwise specified herein, all examination and tests shall be conducted by the contractor subject to surveillance and approval by the Government
(see 6.3). When specified (see 6.2), the Government will conduct any or all of the first article
examination and tests, as specified (see 6.2). When specified (see 6.2), the contractor shall furnish one or more rollers for initial production inspection as specified in 4.3.2.
3.3 Material. Materials shall be as specified herein and on the drawings. Material not specified herein shall be selected by the contractor and shall be subject to all provisions of this specification (see 6.6).
3.3.1 Material deterioration prevention and control. The materials used in fabrication of the roller shall be either inherently corrosion resistant and weatherproof or protected from the
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business