MIL-R-32o6B
3.li.3 Drop. The reeling machine shall show no physical damage .except minor surface abrasion after being subjected to the test specified in 4.5.3, and shall meet the requirements of 3.5.l.
3.5 Operational requirements.
3.5.1 Operation. Reeling Machine RL-39( } shall be capable of operation with Spool DR-8( ) complete with 1I4 mile of Wire WD-1( )ITT. (See 6.3.) The reeling machine with loaded DR-8( ) shall operate smoothly and without
binding when cranked by hand to sivate recovery of vi.re. The bearings and shaft shall be examined visually to determine conformance. (See 4.6.1.)
3,5.2 Qperational life (accelerated). vAfter 24O hours or continuous cycling in accordance with 4.6.2, the reeling macnine shall meet the requirements or
3.5.1 without adjustment or repair.
3.6 Workmanship. Reeling Machine RL-39( ) shall be manu.ractured and
assembled in accordance with the applicable portions of the following paragraphs
herein: (See 4.6.)
Plastic materials and parts. Lubrication.
Cleaning. Riveting. Welding.
4 • QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of al1 inspection requirements as specified-herein. Except as otherwise specified in
the contract or order, the supplier may'·use his own or any other facilities suitable for the performance or the inspection requirements specified herein, unless disD approved by the Gover11111ent. The Government reserves the right to perform any or
the inspections set forth in the specificationwhere such inspection6 are deemed necessary to assure that supplies and services conform to prescribed requirements.
4.2 Classification or inspection. Inspvction shall be classifved as follows: (a) Inspection covered by subsidiary documents. (See 4.3.}
(b) Quality conformance inspection.
(l) Quality conformance inspectionof product before preparation for delivery. (See 4.4.)
(2) Quality conformance inspection of prvparation for delivery.
(See v.9.)
5
Source: https://assist.dla.mil -- Downloaded: Check the source to verify that this is the current version before use.
·------------------------------
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business