OO-R-2853
Tire and Rim Association, Inc. (TRA)
TRA Yearbook
(Application for copies should be addressed to the Tire and Rim Association,
Inc., 175 Montrose West Avenue, Suite 150, Copley, OH 44321.)
(Non-Government standards and other publications are normally available from
the organizations that prepare or distribute the documents. These documents
also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Description. The roller shall consist of a diesel engine and a
hydrostatic propulsion system, including but not limited to: a single drum
roller and two pneumatic tires, mounted and connected to a chassis which steers
by means of articulation.
3.2 First article. The contractor shall furnish one complete unit for first
article inspection and testing. The first article shall be identical to the
production items in accordance with the terms of the contract. The first
article shall be inspected and tested by the contractor, in the presence of
government representatives, at the site selected by the contractor. Costs of
testing including test scheduling, transportation, fuel, power, and materials
shall be borne by the contractor. The contractor is not responsible for travel
expenses incurred by Government representatives. Approval of the first article
shall not relieve the contractor of' the responsibility to furnish equipment in
accordance with contract and specification requirements. No changes or
deviation from the approved first article will be acceptable without prior
written approval of the contracting officer. The first article, after testing
and approval, shall be retained by the contractor at his manufacturing facility
for use by the Government Inspector for comparative purposes in connection with
the production units required to be delivered under this contract. In the event
the contractor desires to deliver the test model as a contract item, it shall be
delivered as the last item on the contract only after the contractor, at his own
expense, shall have completely cleaned, reconditioned, and overhauled the unit,
making such replacements and modification thereto as are required to make the
unit acceptable as a contract item.
3.3 Standard commercial product. The roller shall, as a minimum, be in
accordance with the requirements of this specification and shall be the
manufacturer's standard commercial product. Additional or better features which
are not specifically prohibited by this specification but which are a part of
the manufacturer's standard commercial product, shall be included in the roller
being furnished. A standard commercial product is a product which has been sold
or is being currently offered for sale on the commercial market through
advertisements or manufacturer's catalogs, or brochures, and represents the
latest production model.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business